1000 Cubic Meter Crawler Drainage Robot

• Application: Drainage
• Using Field: Land
• Suitable for: Adult
• Type: Drainage Robot
• Material: Steel
• Name: 1000 Cubic Meter Crawler Drainage Robot
• Model NO.: LT-1000
• Maximum Speed: ≥2.4km/H
• The Bearing Capacity of The Track Chassi: ≥3000
• Maximum Wading Depth: ≥600mm
• Maximum Climbing Grade: ≥25°
• Maximum Departure Angle of The Robot: ≥20°
• Transport Package: Export Package
• Trademark: TOPSKY
• Origin: China
• Production Capacity: 10 Sets/Month

Product Description

 

1.Overview

Crawler fire emergency water supply and drainage robot flood control pump is a diesel engine, power station, hydraulic submersible pump, crawler robot, remote control system, hydraulic power system as a whole, so that it can be used with some special working conditions and environments. For example, when the underground garage, still explosive environment, no power and no power environment needs temporary large flow drainage, the effect of this series of tracked fire drainage robot is obvious.

2.Scope of application

Used in emergency rescue, urban fire, forest fire, public safety and so on

3.Product features

1. 1, the pump adopts 300YXZXW1000-12-55 vacuum auxiliary self-priming centrifugal pump
2. 2, the pump is equipped with and without water dry rotation protection system, protecting the impeller of the pump in the case of no liquid high-speed rotation in the pump chamber, will not cause damage to the mechanical seal, impeller and pump chamber.
3. 3, the pump body material is HT cast iron, toughness and plasticity is high. At low temperature, toughness changes to brittleness, but the impact value of low temperature is higher, and there is a certain resistance to temperature acute change and corrosion resistance;
4. 4, centrifugal pump shaft, impeller made of precipitation hardening austenitic stainless steel, with high strength, high toughness, high corrosion resistance, high oxidation resistance and excellent formability, weldability and other comprehensive properties;
5. 5, the impeller can pass the maximum particle diameter of 100mm;
6. 6, the configuration of vacuum auxiliary system, vacuum pump using rotary vane vacuum pump does not need water cooling, starting the self-priming pump and vacuum pump run together at the same time, vacuum pump with automatic start and stop function when the self-priming pump comes out of the water, the vacuum pump will automatically stop when the negative pressure of the self-priming pump inlet pipe is low, replacing the original vacuum auxiliary self-priming pump used by the vacuum pump has been self-priming The disadvantages of pumps working together at the same time can easily lead to damage caused by water intake and fatigue operation of vacuum pumps
7. 7. After starting the engine, the vacuum pump and the water pump work at the same time;
8. 8, the use of fully automatic function of the vacuum auxiliary system, to ensure that the vacuum pump chamber will not be flooded and cause failure or damage;
9. 9. After the pump is configured with a vacuum auxiliary system, the outlet time only needs 30s in the case of maximum suction working;
10. 10, the vacuum auxiliary self-priming device does not need additional power source, and the engine tail shaft is connected with a belt pulley with a belt between the pulley and the vacuum pump is set up an electronic clutch and the automatic controller is connected to the automatic controller has a liquid level sensor connected to the water tank at the upper end of the self-priming pump when water is detected, the feedback signal to the controller makes the control clutch and the vacuum pump pulley separate. After separation, only the clutch and the engine start at the same time;
11. 11. The suction range can reach 9m after the auxiliary vacuum pump is configured.
12. The suction range of the single self-priming pump can reach 8 meters, and when the vacuum auxiliary failure is filled with water, the pump can also self-priming 8 meters high

4.Main specification

1. Driving mode:
(1) Adopt self-powered drive, all-terrain track chassis, track walking using hydraulic motor drive, maximum speed ≥2.4km/h.
(2) The height of the vehicle is less than 1.8 meters, the width is less than 1.85 meters, the length is less than 3.5 meters, and the weight is not more than 3 tons, which can be applied in complex conditions such as narrow roads and underground garages.
(3) The bearing capacity of the track chassis is ≥3000kg.
(4) The vehicle is equipped with a car body, and the pump unit and control system are installed in the car body.
(5) Maximum wading depth ≥600mm
(6) Maximum climbing grade ≥25°
(7) Maximum departure Angle of the robot ≥20°
(8) The maximum obstacle crossing height of the robot is ≥250mm
(9) The robot has a night lighting device
2. Engine:
(1) Speed 1500-1800rpm.
(2) Diesel engine power ≥90KW.
(3) The fuel tank volume can meet the continuous working of the vehicle ≥8 hours.
(4) A high-elastic coupling is used between the engine and the water pump, and the self-priming pump can be idled for a long time during the walking of the tracked vehicle.
(5) non-road country III emissions
3. Control system:
(1) The wireless intelligent remote control system can achieve remote control walking, starting, stopping, speed regulation and other functions.
(2) Can display oil temperature, oil pressure and other parameters, and when the fault is detected, alarm command can be issued.
(3) With a battery switch to prevent battery leakage when stored for a long time.
(4) The operation panel is equipped with an "emergency stop" button.
(5) Receiver transmit power: ≥13dBm (20mW).
(6) Receiver receiving sensitivity: ≥-125dBm.
(7) Transmitter transmission power: ≥13dBm (20mW).
(8) Remote control distance: ≥500m.
(9) Endurance: ≥50h.
(10) Weight: ≤2.3kg.
(11) Battery capacity: ≥5000mAh
4, water pump: self-priming centrifugal pump
★ (1) The flow rate is ≥1000m³/h when the head is 15m, the flow rate is ≥800m³/h when the head is 17m, the flow rate is ≥700m³/h when the head is 20m, the flow rate is ≥600m3/h when the head is 27m, the suction range is ≥8m (the self-priming height of the single self-priming pump is ≥7.5m).
★ (2) Pump body material: stainless steel.
★ (3) The diameter of particles allowed to pass is ≥100mm.
★ (4) Import and export direction: back into the top water.
★ (5) The inlet pipe diameter is divided into 2 200mm, and the outlet pipe diameter is divided into 2 200mm.
★ (6) The pump body is provided with an overhaul port, a water outlet and a sewage outlet. Remove impurities without removing the pump. The diameter of the access port is at least 150mm.
★ (7) The impeller adopts stainless steel open impeller to meet the full head working diesel engine will not be overloaded. Provide photos of the impeller when bidding (check the dirt cover plate when opening and removing it during acceptance).
★(8) When the robot walks, the self-priming pump allows idling time ≥15 minutes
5, vacuum auxiliary system:
★ The vacuum pump uses an oil-lubricated vacuum auxiliary pump to play an auxiliary role. Vacuum pump pumping capacity ≥45m3/h, the ultimate vacuum degree -0.0001mpa.
6, quick joint: the inlet and outlet of the quick joint, the inlet surface of the hot dip galvanized treatment; The water outlet adopts alloy quick connector.
7, hose: with DN200 drainage pipe ≥50m (fire hose ≥25m/ roll) the intermediate joint is made of aluminum alloy quick joint.
8, water inlet pipe: DN200 beef pipe ≥8m with the corresponding quick connector, filter head and low level water suction tray.