|
4.1 Overall Technical Parameters
- Walking mode: Walking type all-terrain design. Each hydraulic outrigger can be freely extended and retracted to adjust the length. The adjustment directions are ≥ 3 types, including front and rear, left and right, and up and down. It can perform extreme operations such as spanning and climbing in complex terrains.
- Weight: ≤ 5.5t
- Engine power: ≥ 55.4kw
- Dimensions: ≤ length 4500mm × width 2000mm × height 2200mm
- Maximum climbing angle ≥ 45°, and it can work on a slope ≤ 30°
- Maximum obstacle crossing height ≥ 2m
- Maximum trench crossing width ≥ 3 m
- Working space dimensions: Maximum working height ≥ 4500mm, maximum working length ≥ 4000mm, maximum working depth ≥ 1000mm;
- The retractable robotic arm is equipped with a hydraulic bucket, which can excavate earth, sand, gravel, etc. The bucket volume ≥ 100L;
- The retractable robotic arm is equipped with a hydraulic grab bucket, which can grab and excavate earth, sand, gravel, etc. The grab bucket volume ≥ 100L;
- The retractable robotic arm is equipped with a hydraulic shear, which can cut obstacles such as steel bars and concrete. The opening distance ≥ 200mm, and the diameter of the cut round steel ≥ 40mm;
- The retractable robotic arm is equipped with a disc saw, which can cut obstacles such as steel bars and concrete. The diameter of the saw blade ≥ 400mm, and the cutting depth ≥ 200mm;
- The retractable robotic arm is equipped with a breaking pick, which can quickly break reinforced concrete, hard stones, etc. The impact frequency ≥ 1000 times/minute, and the impact energy ≥ 10J;
- The upper carriage of the machine rotates 360° horizontally, and the rotation speed ≥ 10rpm;
- Remote control detection distance: ≥ 1km
- Permissible working environment temperature: -40~50°C
- Maximum applicable altitude: ≥ 2500m
- One set of electric traction system is configured: Traction force ≥ 5T, traction length ≥ 15m
- It has the functions of fault self-diagnosis, maintenance warning and guidance.
4.2 Multifunctional Hydraulic Power Output Interface:
Ultra-high pressure flow rate ≥ 0.7L/min; low pressure flow rate ≥ 4L/min, maximum working pressure ≥ 72MPa. Ultra-high pressure output interfaces are reserved. There are two ultra-high pressure outputs, and the two ultra-high pressure outputs can be used independently without affecting each other. Hydraulic disc saws, hydraulic spreaders, hydraulic generators, etc. can be connected externally [This parameter is consistent with the inspection report of the national-level inspection agency].
4.3 Fire Extinguishing System Mounted on the Robotic Arm:
Domestic electronically controlled fire monitor, working pressure ≥ 0.8Mpa, can adjust direct current and atomization. Water/foam flow rate: 80L/s, range (m): ≥ 85m (water) [This parameter is consistent with the inspection report of the national-level inspection agency].
4.4 Video Detection and Sensing Configured for the Robot
Equipped with 3 high-definition cameras, which can realize remote monitoring of the on-site environment; network high-definition infrared night vision cameras are installed at the front and rear of the robot; a network high-definition 360° pan-tilt camera is integrated, which can realize up, down, left, right, zoom out and zoom in operations, 1080P; [This parameter is consistent with the inspection report of the national-level inspection agency].
4.5 Multi-gas Detection Module Configured for the Robot:
- Detection types and ranges: Methane: 0~100%VOL, Carbon dioxide: 0~5%VOL, Carbon monoxide: 0~5000ppm, Nitrogen dioxide: 0~50ppm, Ammonia: 0~100ppm, Oxygen: 0~30% O2, Humidity: 0~100RH, Temperature: -20-100ºC [This parameter is consistent with the inspection report of the national-level inspection agency].
- Protection level: ≥ IP65 [This parameter is consistent with the inspection report of the national-level inspection agency].
- Explosion-proof performance: Not lower than Ex d ib I Mb [This parameter is consistent with the inspection report of the national-level inspection agency].
- The toxic and harmful gas detection and alarm system for special disaster rescue has passed the inspection of the national authoritative inspection agency, and a copy of the certificate is provided.
- It has a Certificate of Approval for the Pattern of Measuring Instruments (CPA) [Provide a copy of the Certificate of Approval for the Pattern of Measuring Instruments with the official seal of the bidder as proof].
4.6 Leakage Detection Module Configured:
- A handheld leakage alarm is equipped, which can detect in real time whether there is a leakage phenomenon in the surrounding environment.
- The leakage detector for water rescue can detect the leakage of 120/240V lines more than 3 meters away [This parameter is consistent with the inspection report of the national-level inspection agency].
4.7 Cab Operation Mode
- The cab is equipped with a foot throttle, an operation control lever, an instrument display screen and a driving horn.
- The integrated digital display meter in the cab can display basic information such as the fuel quantity of the equipment, the engine speed, and the pitch and roll angles of the vehicle body. A reversing display is equipped, and the screen of the reversing display is installed in a position where the driver can easily observe it;
- It can realize operations such as walking control, attachment control, hydraulic expansion control, fire monitor control, lighting control, and warning light control.
4.8 Wireless Remote Control Terminal
A handheld integrated remote control terminal is configured. The working time is 8h, and the display screen is not less than 10.1 inches and is high-brightness; Robot control and water monitor control are integrated; It supports video recording and video projection; Video display, vehicle body data information display, anti-tipping safety warning function and alarm information display are integrated on the same display screen; [This parameter is consistent with the inspection report of the national-level inspection agency].
4.9 Equipment Cloud Management Platform Configured:
- The equipment can be connected to the equipment cloud management platform: It can remotely monitor equipment information, gas and video information, and manage the whole life cycle of the equipment [This parameter is consistent with the inspection report of the national-level inspection agency].
- The equipment can be connected to the equipment cloud management platform for visualization: Visualized large-screen display, GIS map positioning, and graphic display functions [This parameter is consistent with the inspection report of the national-level inspection agency].
- The equipment can be connected to the PC terminal and APP terminal of the equipment cloud management platform for display, and the data is automatically synchronized in real time [This parameter is consistent with the inspection report of the national-level inspection agency].
- The equipment cloud management platform supports one-click remote firmware upgrade of the equipment [This parameter is consistent with the inspection report of the national-level inspection agency].
- Provide the software copyright certificates of the [Emergency Fire Equipment Cloud Management Platform System] and the [Emergency Resource Information Management Platform].
4.10 Others:
Emergency transportation plan (optional): Special transportation trailer for the robot or special transportation vehicle for the robot
|
Audited Supplier 
){kind=link}